Kickstand for HEZZO GT06

Product designation

• Name : Kickstand / Side stand

• Use : Accessory for parking the HEZZO GT06 electric scooter

Materials & Design

Typical dimensions

To be confirmed according to the exact model, but generally for the HEZZO GT06:

• Kickstand length : between 9 and 11 cm (from the mounting point to the ground)

• Mounting plate width : approximately 3 to 4 cm

• Hole spacing (center distance) : 30 to 35 mm

• Weight : Approximately 100 to 150 g

Compatibility

• Compatible with : HEZZO GT06 (all versions), and often compatible with other HEZZO scooter models (GT01, T3, etc.)

• Mounting : Attaches directly to the left side frame, near the rear wheel, on the factory-provided mounting points.

• Not compatible with : Models without mounting points or non-flat tubular frames.

⚙️ Installation instructions

1. Prepare the tools :

   • Allen key (usually 4 mm or 5 mm)

   • Phillips screwdriver (if Phillips screw model)

   • Threadlocker (optional, to prevent loosening)

2. Align the kickstand :

   • Position the stand on the frame mounting holes (usually near the rear shock absorber or at the rear of the deck).

3. Tighten securely :

   • Tighten the screws without overtightening to avoid damaging the threads.

   • Check that the stand pivots without abnormal resistance.

4. Test stability :

   • Deploy the stand and place the scooter on it. It should remain upright, with no risk of tipping over.

Replacement or upgrade

• Compatible alternatives : Universal kickstands for 8 to 10 inch scooters, with double-screw mounting plate.

• Possible improvement :

  • Height-adjustable kickstand

  • Reinforced kickstand for rough terrain

  • Kickstand with a wide base for better stability